Ключевые слова: HTS, dynamo, flux pumps, coils, charging characteristics, modeling, current-voltage characteristics, resistance, inductance
Ключевые слова: rotating machines, generators, HTS, flux pumps, review, numerical analysis, modeling, dynamo
Ключевые слова: HTS, GdBCO, bulk, single grain, undulator, helical winding, laser application
Ключевые слова: trapped field magnets, HTS, GdBCO, bulk, single grain, fabrication, Jc/B curves, trapped field distribution, experimental results, modeling
Ключевые слова: HTS, GdBCO, bulk, rings, thermal stress, heat generation, pulsed magnetization, mechanical properties, fracture behavior, numerical analysis, modeling
Ключевые слова: MgB2, bulk, disks, trapped field, thickness dependence, numerical analysis, modeling, experimental results, critical caracteristics, Jc/B curves
Ключевые слова: portable unit, trapped field magnets, gradient, gravity, HTS, REBCO, bulk, rings, levitation performance, magnetic force, prototype, fabrication, measurement setup, cooling technology
Calvi M., Zhang K., Ainslie M.D., Liang X., Dennis A.R., Hellmann S., KINJO R., Schmidt T., Durrell a.J.
Ключевые слова: HTS, GdBCO, bulk, undulator, critical caracteristics, critical current density, measurement setup, test results
Shi Y., Cardwell D.A., Durrell J.H., Ainslie M.D., Dennis A.R., Tsui Y., Moseley D.A., Cientanni V., Beck M.R.
Ключевые слова: HTS, YBCO, GdBCO, EuBCO, bulk, single grain, high field magnets, portable unit, trapped field magnets, pulsed magnetization, trapped field, experimental results
Cardwell D.A., Durrell J.H., Ainslie M.D., Dennis A.R., Shi Y.-H., Tsui Y., Moseley D.A., Cientanni V., Beck M.R.
Ключевые слова: HTS, GdBCO, bulk, rings, pulsed magnetization, trapped field, cooling technology, experimental results
Ключевые слова: HTS, GdBCO, bulk, fabrication, infiltration process, seeding technique, melting, comparison, pulsed magnetization, coils, iron yoke, trapped field distribution, experimental results
Speller S.C., Grovenor C.R., Shi Y., Cardwell D.A., Durrell J.H., Ainslie M.D., Dennis A.R., Mousavi T.
Ключевые слова: HTS, GdBCO, tapes, stacked blocks, magnetic flux concentration, magnetic shielding, modeling, flux density, distribution, numerical analysis
Ключевые слова: HTS, bulk, single grain, rings, pulsed magnetization, flux jumps, penetration depth, modeling, current density, distribution, magnetic field distribution, trapped field
Ключевые слова: HTS, GdBCO, coated conductors, tapes, width, penetration depth, permanent magnets, magnetic field distribution, experimental results, modeling
Ключевые слова: HTS, REBCO, bulk, trapped field magnets, gradient, gravity, numerical analysis, magnetic properties, magnetization, mechanical properties, stress distribution
Ключевые слова: Maglev system, HTS, YBCO, bulk, guidance, levitation performance, measurement setup, dynamic operation, modeling, numerical analysis
Ключевые слова: MgB2, bulk, trapped field magnets, pulsed magnetization, flux jumps, trapped field, temperature dependence
Shi Y., Cardwell D.A., Ainslie M.D., Dennis A.R., Hlasek T., Plechacek V., Namburi D.K., Congreve J.V., Huang K.Y., Plechacek J., Durrell.V.
Ключевые слова: HTS, REBCO, magnets, coils, insulationless, series connection, modeling
Ключевые слова: HTS, coated conductors, tapes, stacked blocks, cables, geometry effects, dynamic resistance, modeling, numerical analysis
Ключевые слова: HTS, REBCO, coated conductors, wires, stators, generators, design parameters, flux pumps, frequency dependence, cycling, voltage, power supply, modeling, numerical analysis, dynamo
Ключевые слова: numerical analysis, critical caracteristics, Jc/B curves, MgB2, composites, bulk, rings, pulsed magnetization, trapped field, iron yoke, modeling
Shi Y., Durrell J.H., Calvi M., Zhang K., Ainslie M.D., Hellmann S., Dennis A., Kittel C., Moseley D.A., Schmidt T.
Ключевые слова: synchrotron, HTS, GdBCO, bulk, undulator, design, trapped field, cooling technology, test results, model small-scale, magnetic field distribution
Shi Y., Cardwell D.A., Hellstrom E.E., Durrell J.H., Ainslie M.D., Jaroszynski J., Zhou D., Dennis A.R., Namburi D.K., Huang K.Y., Filipenko M., Srpcic J., Boll M.
Ключевые слова: HTS, GdBCO, bulk, composites, stacked blocks, magnets, trapped field, temperature dependence, mechanical properties, stress effects, experimental results
Ключевые слова: HTS, YBCO, coated conductors, stacked blocks, cables, dynamic resistance, modeling, numerical analysis
Ключевые слова: HTS, generators, stators, coated conductors, width, design, modeling, eddy currents, transport currents, critical caracteristics, current-voltage characteristics, dynamo
Ключевые слова: HTS, REBCO, bulk, rings, reinforcement, mechanical properties, stress effects, pulsed magnetization, thermal properties, numerical analysis, trapped field
Ключевые слова: HTS, GdBCO, bulk, rings, mechanical reinforcement, stress effects, compression, numerical analysis, modeling, magnetization, flux density, trapped field
Ключевые слова: high field magnets, LTS, coils outer, HTS, REBCO, coated conductors, coils insert, screening current, shielding effects, mechanical properties, stress distribution, screen
Takahashi K., Shi Y., Cardwell D.A., Fujishiro H., Durrell J.H., Ainslie M.D., Namburi D.K., Hirano T., Kamada T.
Ключевые слова: HTS, YBCO, bulk, single grain, design parameters, fabrication, infiltration process, melting, comparison, pulsed magnetization, trapped field, microstructure, pinning, trapped field distribution, critical caracteristics, Jc/B curves, temperature dependence, porosity, experimental results
Ключевые слова: experimental results, HTS, YBCO, bulk, guidance, levitation performance, Maglev system, magnetization, stability, modeling, model small-scale, design parameters, time evolution
Ключевые слова: power equipment, HTS, coated conductors, ac losses
Takahashi K., Cardwell D.A., Fujishiro H., Durrell J.H., Ainslie M.D., Huang K.Y., Namba S., Chaddock J.
Shi Y., Cardwell D.A., Durrell J.H., Ainslie M.D., Dennis A.R., Huang K.Y., Filipenko M., Srpcic J., Boll M., Perez F.
Ключевые слова: HTS, GdBCO, bulk, shielding current density, penetration depth, ac losses, trapped field, pinning, field decay, modeling, numerical analysis
Ключевые слова: HTS, REBCO, bulk, disks, pulsed magnetization, critical caracteristics, Jc/B curves, temperature dependence, modeling, GdBCO, trapped field, experimental results
Ключевые слова: rotating machines, HTS, stators, overcurrent, coated conductors, experimental results, numerical analysis, comparison, dynamo
Ключевые слова: bulk, flux creep, trapped field magnets, modeling, numerical analysis, magnetic field distribution, current density, distribution
Ключевые слова: HTS, GdBCO, bulk, cylinders, trapped field magnets, magnetic flux concentration, design, hybrid systems, magnetic field distribution
Ключевые слова: HTS, GdBCO, bulk, pulsed magnetization, dynamic operation, trapped field distribution, temperature rise , time evolution, experimental results
Ключевые слова: HTS, GdBCO, bulk, disks, geometry effects, trapped field, pulsed magnetization, trapped field distribution, temperature rise , experimental results, numerical analysis
Ключевые слова: trapped field magnets, modeling, magnetic flux concentration, pinning, shielding effects, MgB2, bulk, GdBCO, cylinders, magnetic field distribution, numerical analysis, new
Ключевые слова: HTS, REBCO, coated conductors, dynamic resistance, modeling, numerical analysis, ac losses, critical caracteristics, critical current density, transport currents, ac magnetic field dependence, angular dependence, critical current, n-value, current distribution, experimental results, comparison
Ключевые слова: HTS, YBCO, cylinders, bulk, magnetic systems, measurement setup, trapped field magnets, numerical analysis, modeling, trapped field distribution
Cardwell D.A., Vanderbemden P., Durrell J.H., Ainslie M.D., Zhou D., Speller S., Bradshaw T., Filipenko M.
Ключевые слова: bulk, REBCO, HTS, MgB2, Bi-based systems, trapped field, high field magnets, portable unit, medical applications, rotating machines, power equipment, shields, MRI magnets, NMR magnet, motors, status, stability, cryogenic systems, cryocoolers, fabrication, review
Shi Y., Cardwell D.A., Durrell J.H., Ainslie M.D., Zhou D., Dennis A.R., Huang K., Filipenko M., Srpcic J., Boll M.
Campbell A.M., Shi Y., Cardwell D.A., Durrell J.H., Ainslie M.D., Zhou D., Dennis A., Huang K.Y., Bause R., Filipenko M., Srpcic J., Boll M.
Shi Y., Cardwell D.A., Durrell J.H., Ainslie M.D., Zhou D., Dennis A., Namburi D.K., Huang K.Y., Bause R., Filipenko M., Srpcic J., Boll M.
Ключевые слова: HTS, YBCO, bulk, single grain, mechanical properties, bending process, tensile tests, distribution, elastic behavior, porosity, phase composition, stress effects, experimental results
Ключевые слова: power equipment, FCL inductive, core saturated, numerical analysis, HTS, coils, ac losses, modeling, design, design parameters
Ключевые слова: MgB2, bulk, trapped field, pulsed magnetization, disks, flux jumps, measurement technique, experimental results
Shi Y., Cardwell D.A., Durrell J.H., Zhao W., Ainslie M.D., Zhou D., Dennis A.R., Palmer K.G., Beck M.
Ключевые слова: HTS, YBCO, GdBCO, SmBCO, bulk, pulsed magnetization, trapped field distribution, experimental results, magnets
Ключевые слова: HTS, YBCO, bulk, pulsed operation, trapped field, trapped field distribution, experimental results
Cardwell D.A., Fujishiro H., Shi Y.- H., Ainslie M.D., Dennis A.R., Zou J., Zhai W., Mochizuki H., Namburi D.K.
Ключевые слова: HTS, YBCO, bulk, single grain, fabrication, precursors, powder processing, pulsed magnetization, trapped field, trapped field distribution
Takahashi K., Shi Y., Cardwell D.A., Fujishiro H., Ainslie M.D., Zhou D., Dennis A.R., Zou J., Mochizuki H., Namburi D.K.
Ключевые слова: HTS, YBCO, bulk, fabrication, single grain, numerical analysis, precursors, powder processing, modeling, magnetization, trapped field distribution
Ключевые слова: rotating machines, numerical analysis, bulk, flux density, distribution, trapped field
Babu N.H., Fujishiro H., Vanderbemden P., Yamamoto A., Fagnard J., Naito T., Ainslie M.D., Zou J., Bhagurkar A.G.
Ключевые слова: MgB2, bulk, hot isostatic pressing, infiltration process, fabrication, comparison, numerical analysis, modeling
Shi Y., Cardwell D.A., Vanderbemden P., Fagnard J., Vanderheyden B., Ainslie M.D., Dennis A.R., Wera L., Philippe M.P.
Ключевые слова: HTS, YBCO, bulk, single grain, flux density, distribution, trapped field magnets, experimental results, modeling, ferromagnetic material, disks, induction, interfaces, numerical analysis, comparison
Ключевые слова: HTS, YBCO, bulk, single grain, seeding technique, pulsed magnetization, modeling, numerical analysis, trapped field magnets, trapped field distribution
Ключевые слова: HTS, REBCO, YBCO, bulk, trapped field, pulsed magnetization, comparison, modeling, numerical analysis, experimental results, trapped field distribution
Ключевые слова: rotating machines, HTS, wires, stators, bulk, rotors, generators, wind farms application, YBCO, motors, vehicle applications, economic analysis, modeling
Campbell A.M., Strasik M., Shi Y., Cardwell D.A., Hellstrom E.E., Durrell J.H., Ainslie M.D., Jaroszynski J., Dennis A.R., Palmer K.G., Hull J.
Ключевые слова: HTS, REBCO, bulk, reinforcement, trapped field, experimental results
Ключевые слова: HTS, coils, ac losses, numerical analysis
Ключевые слова: HTS, YBCO, coated conductors, coils, rotating machines, ac losses, transport currents, modeling, numerical analysis, RABITS process
Ключевые слова: HTS, coils racetrack, YBCO, coated conductors, modeling, ac losses, ex-situ process, nucleation
Ключевые слова: HTS, motors synchronous, numerical analysis, rotating machines, modeling, YBCO, coated conductors, ac losses, coils racetrack, stators, bulk, rotors, prototype
© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.